Pimoroni - Aluminium Heatsink Case for Raspberry Pi 4 - Svart

Hög kvalitet Hög kvalitet
Pressade priser Pressade priser
Brett utbud och sortiment Brett utbud

Produktinformation

Why use a heatsink and a case, when you can use a heatsink case?! This sleek, anodised aluminium case for Raspberry Pi 4 will give you 10-15°C of passive cooling under full CPU load Pretty cool.This anodised aluminium heatsink case will protect your Raspberry Pi 4 and give you the best passive cooling we"ve seen in our extensive testing.

It"s great for situations where you want completely silent cooling, like home media centres.It comes with a thermal pad to provide thermal contact between the CPU and top case, and a handy allen key and set of hex bolts to attach the case together.The case gives you access to all of the ports, pins, and connectors. You can just about get away with using low-profile HATs and pHATs (those without bulky components on the underside, using one of our boster headers, but be extremely careful not to short any components on the metal top case!FeaturesAnodised aluminium top and bottom case (in black or gold)Heatsink finsThermal padHex bolts and allen key includedAccess to all ports, pins, and connectorsCompatible with Raspberry Pi 4AssemblyClick here to see our tutorial on assembling the case, or follow the brief instructions below.Assembling your heatsink case is pretty easy and should only take a couple of minutes

The first, and most important thing is to make sure that your Pi is powered off and unplugged before you fit the case.Take one of the thermal pads and peel the protective films off both sides of it (there"s a white film and an easy-to-miss clear film on the other side. Stick the thermal pad onto your Pi"s CPU (the metal square nearest the middle of the PCB).Sticking the thermal pad to the CPU first is a much better way to position it correctly than trying to stick it to the case.

Only use one thermal pad with the Raspberry Pi 4.Position the top case and then, holding it in place, flip the whole thing over and position the bottom case on the underside of your Pi. Use the four hex bolts and allen key to secure the case.NotesThe case is metal and hence conductive, so be careful not to short any components on it, and ensure that your Pi is powered off and unplugged when fitting the caseIt may be obvious, but the case will get hot in useDimensions 87x56x25.5mm .

Hitta rätt produkt direkt!

Just nu hittar vi 176 st produkter

Pi-kort från andra varumärken

Webrock Retro-fig 4 - 128GB

Pi-kort från Webhallen

Här har vi samlat Pi-kort från Webhallen.
Radxa Rock 5B enkortsdator 8GB

Pi-kort från OKDO

Utforska allt inom Pi-kort från OKDO.

Inspiration

Här kan du fördjupa dig i en mängd olika ämnen, från nyheter och trender till tips och råd inom en rad olika områden. Vårt mål är att erbjuda högkvalitativt innehåll som inspirerar, informerar och utbildar våra läsare. Läs vidare för att upptäcka spännande ämnen och få inspirationen till att vidga era vyer.

Klicka här för mer inspiration

© Pryljedi.se 2024